<%@ Language=VBScript %> INTRODUCTION

 

   

Site em Português

 

SEJA BEM VINDO AO

 

SITE DE TRIKE DO ZECA

 
 

 

 

 

Site in english

 

 

 

 

 

WELCOME TO ZECA'S TRIKE SITE

 

 

 

 

 
 

DISCLAIMER

Building a trike is hazardous. Any modification to the original vehicle can be hazardous. Before starting your build, realize that you and you alone are responsible for anything that could happen to yourself and others that you come into contact with. Please, when you work on your trike, if you can't perform the tasks such as design, welding, etc., have a professional do it for you.

(From Ding Bob's Site: "We can't stress enough the importance of having qualified people work on the high load areas of your trike because if it is done incorrectly then you are going to get into trouble.  DON'T TAKE THE RISK.)

It's not a trike but it is a good illustration of the above.

Test it in a safe, legal manner. The web sites of trikers who show you how they did it are not responsible for yours or others well being.  If you cannot accept responsibility and are the type that will sue, you are scum, please disregard everything you see on any of the triker's web sites. We do not advise anyone to actually build or even consider building these  devices.  Read, but do not act upon this information.  Everyone should just live a quiet, past oral life because the dogs of law lie around every corner and I have no wish to be closed down like other useful websites from threats by parasitic lawyers. (When lawyers get rich, society gets poorer.) Remember they just show you how they did it. They are not recommending that you do it as they did!

 

 
   

 

 

Zeca's mother Mirte and son Rafael

    DANIEL AND  RAFAEL     

THE FOLLOWING PAGES WILL SHOW HOW THIS TRIKE WAS MADE.

ALL MEASUREMENTS ON THE FOLLOWING PAGES WILL BE METRIC  (EXCEPTION BEING THE DRAWINGS OF THE FRONT END WILL BE BOTH INCHES AND METRIC.)

 

The following pages are presented with the cooperation of my friend in Guaira, Sao Paulo,  Brazil. 

 

 

 

To Enter Site Click on gauge